My Cart:

0 item(s) - IDR0.00
You have no items in your shopping cart.

0

Welcome to TechDeals.Asia!

Contact Us :

3D Printer Module Board

Items 1 to 25 of 38 total

Page:
  1. 1
  2. 2

Grid  List 

  1. BIGTREETECH SKR V1.1 32-Bit MKSGEN-L Control Mainboard+TFT35 Display Screen+5Pcs TMC2130 Driver Kit for Reprap 3D Printer

    BIGTREETECH SKR V1.1 32-Bit MKSGEN-L Control Mainboard+TFT35 Display Screen+5Pcs TMC2130 Driver Kit for Reprap 3D Printer

    Package Included: 

    1 x SKR V1.1 32-Bit MKSGEN-L Control Mainboard
    1 x TFT35 Display Screen
    5 x TMC2130 Driver 

    Regarding TMC2130:

    TMC2130(DIY mode) doesn't require you to change the firmware
     ● STP/ DIR Wiring instructions:
     1.Welding resistance at R5 position to make the driver STP/DIR working mode;
     2.Work mode selection: SDI (CFG1), SCK (CFG2)
     
    Regarding TFT35 Touch Screen:
     
     1. 3.5-inch color touch screen
     2. Provide continuous software upgrades, easy to upgrade.
     3. Can be used on most 3D printer motherboards.
     4. Master program needn't modify.
     5. BIGTREETECH TFT35 V1.0 can support the image customization,
        boot logo, all button images can be designed.
     6. BIGTREETECH TFT35 V1.0 can support 7 custom buttons.
     7. Good heat dissipation effect

    Regarding Mainboard:
     
    Description:
    The SKR main board, especially suitable for small and medium-sized printers.
     
    Features:
    1) ARM-class Cortex-M3 series LPC1768 master chip with 32-bit main frequency 100M Can be greatly improved;
    2) Equipped with highly modular open source firmware Smoothieware, convenient for users DIY and secondary development, do not worry about the inability to master the core code of worries;
    3) Using powerful development tools, Keil MDK integrated development environment: support online debugging, more helpful for product development and performance optimization, using C language development, low development threshold.
    4) PCB board wiring is rigorous and beautiful, and specializing in heat dissipation optimization.
    5) Using a dedicated power chip to support 12-24V power input;
    6) Acceptable 24V input, the hotbed current can be reduced to 1/4 under the same power, effectively solving the heating problem of the hotbed MOS tube;
    7) Support Display: 2.8-inch, 3.5-inch color touch screen,  LCD12864 screen;
    8) The system supports Chinese simplified Chinese, English and other languages, which can be switched by itself;
    9) Upgrade the firmware by SD card, which is easy and convenient to operate;
    10) Use the configuration file to set the driving current mode, avoid manual adjustment of the current to cause the burner drive, convenient, safe and reliable;
    11) High-performance MOSFET tube for better heat dissipation.
    12)Support functions:  Non-trace resumption after power off, run out filament, and auto shut down.
     
    Parameters:
    - Microprocessor: ARM Cortex-M3 CPU
    Input voltage: DC12V-DC24V  5A-15A
    Motor Driver: Supports TMC2208, TMC2130, LV8729, DRV8825, A4988Etc. Can be externally connected to the motor drive
    Motor drive interface: X, Y, Z, E0, E1, five channels (each channel has a re-expandable interface), up to 256 subdivisions
    Temperature sensor interface: TH0, TH1, TB, 3 channels 100K NTC (thermal resistance) Display: 2.8 inch TFT, 3.5 inch TFT, LCD12864
    PC communication interface: square USB, easy to plug and unplug, communication baud rate 115200
    Support file format: G-code
    Support machine structure: XYZ, delta, kossel, Ultimaker, corexy
    Recommended software: Cura, Simplify3D, pronterface, Repetier-host, Makerware
    cathy
    Using Method:
     
    1. After the SKR motherboard is powered on, the red light D4 in the lower left corner will light up, indicating that the power supply is normal; The middle of the board 5V SEL is the power supply selection end;
      1) when using USB to power the motherboard, short circuit cap should be used to connect +5V and USB feet;
      2) when the 12v-24v power supply is used, short circuit cap shall be used to connect +5V and INT pins;
    Note: it can be connected to both [12v-24v power] and [USB] at the same time. Short circuit cap must be used to connect +5V and INT in the printing process.
     
    2. SKR motherboard through the [USB] interface and PC communication, need to install the driver to use normally.
      1)Smoothieware-USB-driver-v1.1 driver installation. Drivers are available from the open source web at 
    http://smoothieware.org/windows-drivers
      2)Open the computer "device manager", and you can see the COM number of "smoothieboard USB Serial" asynchronous communication port.
     
    3. SKR motherboard firmware description
    The motherboard will be equipped with firmware (I3 model) for testing, which can be used directly or can be changed according to your own needs
     1)The SKR motherboard firmware access method:
       Log on to the open source site to download:
      https://github.com/Smoothieware/Smoothieware
     2)Firmware update method of SKR motherboard
        Select the file suitable for your model from the downloaded firmware package and copy it to the SD root directory, including:
     ①firmware. bin (all that can be decided based on your own machine)
     ②Configuration file config.txt (you can change the configuration according to your own needs)
     
    The details of the configuration file can be referenced in the open source web address: http://smoothieware.org/configuration-options
     
    Note: 
     
    0. We have a small SD card for each motherboard. File names cannot be changed in the SD card. The file names cannot be changed, firmware. the bin must be lowercase.
    1. 5V SEL of the motherboard must connect INT and  5V pins before printing (that is, 12v-24v power supply must be provided to the motherboard before printing);
    2. Hot bed board receive power must be less than or equal to 110 w (that is, the hot bed resistance is greater than 1.3 Ω), if with high power hot bed, have to external thermal power expanded bed plate;
    3. The wiring process and plug-in driving process must be carried out under the premise of power failure. The power can be turned on after checking the correct connection of the line and the correct insertion of the drive, so as to prevent the wrong connection of the line from burning the motherboard and drive and causing unnecessary losses;
    4.If you want to change the configuration file, backup the factory configuration file to record the pin number of each part of the chip, and then make changes to the new configuration file.







    Learn More

    Regular Price: IDR2,499,416.00

    Special Price IDR1,388,564.00

    You Save: IDR1,110,852.00 (44%)

    Sale
  2. SKR V1.3 32-Bit Smoothieboard Mainboard + 12864 LCD Display+ 5xA4988 Kit for 3D Printer

    SKR V1.3 32-Bit Smoothieboard Mainboard + 12864 LCD Display+ 5xA4988 Kit for 3D Printer

    Parameters:
     
    Appearance size: 110*85mm
    Mounting size: 102*76mm
    Microprocessor: ARM cortex-M3 CPU
    Input voltage: DC12V-DC24V 5A-15A
    Motor driver support: TMC2208, TMC2130, ST820, LV8729, DRV8825, A4988 (can be independently external motor drive)
    Driver working mode support: TMC2130SPI,TMC2208UART
    Motor drive interface: X, Y, Z, E0, E1, five (each has a reextendable interface), Up to 256 subdivisions
    Display: 2.8 "TFT, 3.5" TFT, LCD2004, LCD12864
    Expand the interface function support:  Resume Printing While Power Off,Filament Break Detection,Automatic Shutdown After Printing, Automatic leveling, BLTouch
    Support file format: G-code
    Supported machine architecture: XYZ, Delta, Kossel, Ultimaker, Corexy
    Recommended software: Cura, Simplify3D, pronterface, Repetier-host, Makerware 

    File for you to reference:


    ** For more details about SKR V1.3: click 
    ** Marlin2.0 - Driver  Smoothieware Drive: click

    Package Included:

    1 x SKR V1.3 Board
    1 x 12864 LCD Display
    5 x A4988 Driver
    1 x USB Cable


     


    Learn More

    Regular Price: IDR1,911,561.00

    Special Price IDR1,061,978.00

    You Save: IDR849,583.00 (44%)

    Sale
  3. TMC2209 V2.0 Stepper Motor Driver + Tester USB Serial Port Module Board Mute Drive Device Kit for 3D Printer

    TMC2209 V2.0 Stepper Motor Driver + Tester USB Serial Port Module Board Mute Drive Device Kit for 3D Printer

    Features:
     
    With this TMC2209 tester ,you can change the parameter and modes of TMC2209.
    With the TMC2209 Configurator you can change the settings and program the OTP (One-Time-Programmable) memory of a Trinamic TMC2209 via the UART interface.
     
    Package included:

    1 x Tester Module
    2 x Jumper Cap
    1 x USB Line
    1 x TMC2209 V2.0
    1 x Radiator
    1 x Screwdriver
     
     
















    Learn More

    Regular Price: IDR383,332.00

    Special Price IDR212,962.00

    You Save: IDR170,370.00 (44%)

    Sale
  4. BIGTREETECH SKR Pro V1.1 Control Board 32 Bit ARM CPU 32bit Mainboard Smoothieboard For 3D Printer Parts Reprap

    BIGTREETECH SKR Pro V1.1 Control Board 32 Bit ARM CPU 32bit Mainboard Smoothieboard For 3D Printer Parts Reprap

    Description:

    This is the upgraded version of the BIGTREETECH SKR V1.3 Control Board

    We have already issued a merger request for SKR PRO V1.1 to Marlin. The merger request needs to be approved by Marlin's official website. It takes a while.

    At present, the firmware disclosed on GitHub website is actually the marlin2.0 firmware. You can use the firmware that we have disclosed before the merger. After the merger is completed, you can download the firmware from the official website of Marlin.

    TMC2130 SPI/TMC5160 SPI ,only with 5pcs cable, SKR PRO has onboard SPI function,so TMC2130 SPI /TMC5160 don't need to use cable on SKR PRO.


    GitHub/Manual

    Package included:

    1 x SKR PRO V1.1 Board







    Learn More

    Regular Price: IDR1,546,335.00

    Special Price IDR859,075.00

    You Save: IDR687,260.00 (44%)

    Sale
  5. MKS GEN L Motherboard + 3.5 Inch LCD WIFI Touch Screen + 5x TMC2209 V2.0 Super Silent Stepper Motor Driver Kit for 3D Printer

    MKS GEN L Motherboard + 3.5 Inch LCD WIFI Touch Screen + 5x TMC2209 V2.0 Super Silent Stepper Motor Driver Kit for 3D Printer

    Features:
     
    Combining 2560 and ramps 1.4 on a board solves the problem of complex Ramps 1.4 interface and easy to break down.
    Users can change their own motor driver, support 4988 driver and 8825 driver, TMC2100 driver.
    Reserve external drive signal, and can drive 57, 86 motors by external large drive.
    Using high quality MOSFET tube, the heat dissipation effect is better and the long-term work stability is guaranteed.
    The special power supply chip is used to support 12V-24V power input, which solves the problem of heating and insufficient power supply of Ramps voltage conversion chip.
    Stable and reliable filter circuit greatly reduces the possibility of interference, and avoids the phenomenon of crash and random running in the printing process as much as possible.
    With CH340 serial chip, the problem of 16U2 hard-to-install driver has been solved by reducing cost while ensuring stability and reliability.
    It can accept 24V input and reduce the hot bed current to 1/4 under the same system power, which can effectively solve the heating problem of hot bed MOS tubes.
    Using open source firmware Marlin, the configuration is exactly the same as ramps 1.4, which can directly replace Ramps 1.4.
    It can directly connect the 2004 LCD display and 12864 LCD display. It can support TFT28 and TFT32 touch screen.
    XYZ a-xis uses different colors of terminals to correspond to the motor and limit switch, which is convenient for wiring.
    Humanized design, with different colors of terminals to distinguish the driving direction, reduce the probability of insertion reversal, to prevent damage to the motherboard due to driving insertion.

    Color: 262K
    Display screen size: 3.5 inches
    Touch Screen Type: Resistance Touch Screen
    Resolution: 480*320 PX

    Hardware compatible with StepStick and Pololu A4988
    Drive capability up to 1.7A (RMS) continuous coil current - 2.8A Peak
    Step/Dir interface with microstep interpolation (up to 256 microsteps)
    Configuration via CFG pins or UART interface
    Motor voltage: 5.5...28V
    Logic voltage: 3.3...5V
    RSense: 0.11 Ohm
    stealthChop2 - for quiet operation and smooth motion
    spreadCycle - highly dynamic motor control chopper (enableable via UART, OTP, CFG Pin)
    coolStep - current control for energy savings
    stallGuard4 - sensorless motor load detection
     
    Package included:

    1 x M K S GEN L V1.0
    1 x USB Data Line
    1 x 3.5-inch LCD WIFI Display Screen
    1 x Display Connection Line
    1 x WIFI Connection Line
    5 x TMC2209 v2.0 Stepper Motor Driver
    5 x Radiator
    1 x Screwdriver
     




















    Learn More

    Regular Price: IDR2,923,395.00

    Special Price IDR1,624,108.00

    You Save: IDR1,299,287.00 (44%)

    Sale
  6. MKS GEN L V1.0 Motherboard + 5x TMC2209 V2.0 Super Silent Stepper Motor Driver Kit for 3D Printer

    MKS GEN L V1.0 Motherboard + 5x TMC2209 V2.0 Super Silent Stepper Motor Driver Kit for 3D Printer

    Features:
     
    Combining 2560 and ramps 1.4 on a board solves the problem of complex Ramps 1.4 interface and easy to break down.
    Users can change their own motor driver, support 4988 driver and 8825 driver, TMC2100 driver.
    Reserve external drive signal, and can drive 57, 86 motors by external large drive.
    Using high quality MOSFET tube, the heat dissipation effect is better and the long-term work stability is guaranteed.
    The special power supply chip is used to support 12V-24V power input, which solves the problem of heating and insufficient power supply of Ramps voltage conversion chip.
    Stable and reliable filter circuit greatly reduces the possibility of interference, and avoids the phenomenon of crash and random running in the printing process as much as possible.
    With CH340 serial chip, the problem of 16U2 hard-to-install driver has been solved by reducing cost while ensuring stability and reliability.
    It can accept 24V input and reduce the hot bed current to 1/4 under the same system power, which can effectively solve the heating problem of hot bed MOS tubes.
    Using open source firmware Marlin, the configuration is exactly the same as ramps 1.4, which can directly replace Ramps 1.4.
    It can directly connect the 2004 LCD display and 12864 LCD display. It can support TFT28 and TFT32 touch screen.
    XYZ a-xis uses different colors of terminals to correspond to the motor and limit switch, which is convenient for wiring.
    Humanized design, with different colors of terminals to distinguish the driving direction, reduce the probability of insertion reversal, to prevent damage to the motherboard due to driving insertion.

    Hardware compatible with StepStick and Pololu A4988
    Drive capability up to 1.7A (RMS) continuous coil current - 2.8A Peak
    Step/Dir interface with microstep interpolation (up to 256 microsteps)
    Configuration via CFG pins or UART interface
    Motor voltage: 5.5...28V
    Logic voltage: 3.3...5V
    RSense: 0.11 Ohm
    stealthChop2 - for quiet operation and smooth motion
    spreadCycle - highly dynamic motor control chopper (enableable via UART, OTP, CFG Pin)
    coolStep - current control for energy savings
    stallGuard4 - sensorless motor load detection
     
    Package included:

    1 x M K S GEN L V1.0
    1 x USB Data Line
    5 x TMC2209 v2.0 Stepper Motor Driver
    5 x Radiator
    1 x Screwdriver














    Learn More

    Regular Price: IDR1,597,785.00

    Special Price IDR887,658.00

    You Save: IDR710,127.00 (44%)

    Sale
  7. MKS GEN L Motherboard with 3.5 Inch LCD WIFI Touch Screen Kit for 3D Printer

    MKS GEN L Motherboard with 3.5 Inch LCD WIFI Touch Screen Kit for 3D Printer

    Features:
     
    Combining 2560 and ramps 1.4 on a board solves the problem of complex Ramps 1.4 interface and easy to break down.
    Users can change their own motor driver, support 4988 driver and 8825 driver, TMC2100 driver.
    Reserve external drive signal, and can drive 57, 86 motors by external large drive.
    Using high quality MOSFET tube, the heat dissipation effect is better and the long-term work stability is guaranteed.
    The special power supply chip is used to support 12V-24V power input, which solves the problem of heating and insufficient power supply of Ramps voltage conversion chip.
    Stable and reliable filter circuit greatly reduces the possibility of interference, and avoids the phenomenon of crash and random running in the printing process as much as possible.
    With CH340 serial chip, the problem of 16U2 hard-to-install driver has been solved by reducing cost while ensuring stability and reliability.
    It can accept 24V input and reduce the hot bed current to 1/4 under the same system power, which can effectively solve the heating problem of hot bed MOS tubes.
    Using open source firmware Marlin, the configuration is exactly the same as ramps 1.4, which can directly replace Ramps 1.4.
    It can directly connect the 2004 LCD display and 12864 LCD display. It can support TFT28 and TFT32 touch screen.
    XYZ a-xis uses different colors of terminals to correspond to the motor and limit switch, which is convenient for wiring.
    Humanized design, with different colors of terminals to distinguish the driving direction, reduce the probability of insertion reversal, to prevent damage to the motherboard due to driving insertion.

    Color: 262K
    Display screen size: 3.5 inches
    Touch Screen Type: Resistance Touch Screen
    Resolution: 480*320 PX
     
    Package included:

    1 x M K S GEN L V1.0
    1 x USB Data Line
    1 x 3.5-inch LCD WIFI Display Screen
    1 x Display Connection Line
    1 x WIFI Connection Line
     




















    Learn More

    Regular Price: IDR2,109,102.00

    Special Price IDR1,171,723.00

    You Save: IDR937,379.00 (44%)

    Sale
  8. TriGorilla Main Board Motherboard + 5x TMC2209 V2.0 Driver with Mega2560 & RAMPS1.4 Function for 3D Printer

    TriGorilla Main Board Motherboard + 5x TMC2209 V2.0 Driver with Mega2560 & RAMPS1.4 Function for 3D Printer

    Features:
     
    Simple to install: Integrated with the mighty function of the Mega2560+ramps 1.4 kit, Great reduce the wiring problem, more convenient connection, and more stable.
    Convenient to use: TriGorilla motherboard support LCD2004 and LCD12864 without using adapter, and there are two choices for main board power supply,you can choose DC power supply connection or directly from the terminal, it is convenient to use.
    TriGorilla use CP2102 chip as a serial port communication, communication not only stable,but also avoid the repeated to install the driver(There will be increased “COM” port when replacing the traditional 2560 board,so while those people who need to batch purchasing test, the “COM” increases to a certain value will lead to can’t upload the firmware problem.)
    Excellent compatibility: Firmware can use the same configuration as ramps1.4, the marlin firmware which runs in Mega2560+ramps 1.4 kits can directly running in TriGorilla board.
    Voltage input at super wide range, short-circuit protection: TriGorilla adopts DC - DC step-down scheme design and Recoverable fuse for short-circuit protection, improving the MEGA2560 board serious heating problem,Allowing any power supply from 10V-30V.
    Support up to 5 motor drivers, support A4988/ DRV8825 /TMC2100 driver: Motor drive circuit doesn't integration on the circuit board. You can change any stepper motor driver you need, easier to operate.(Support A4988/ DRV8825 /TMC2100 driver)
    Rich expansion port: TriGorilla had reserved SERVO, UART, IIC expansion, so you can use it realize automatic leveling, control touch screen smart controller,control wireless module and the detection of break, etc
    Wide applicability: widely used in 3D printers, e.g. Kossel, Prusa i3, corexy, etc

    Main Control Chip: ATMEGA256016AU
    Input Power: 10V ~ 30V
    Standby Current: 35mA±5mA
    Stepper Motor Drivers: 5 channel Max
    Hot bed Output Control: 1 channel
    Heated output control: 2 channel
    Under-current output control: 3 channel
    Dimensions: 125mm x 82mm
     
    Package included:

    1 x TriGorilla Motherboard
    5 x TMC2209 V2.0 Driver
    5 x Radiator
    1 x USB Line
    1 x Screwdriver
     




















    Learn More

    Regular Price: IDR1,943,955.00

    Special Price IDR1,079,975.00

    You Save: IDR863,980.00 (44%)

    Sale
  9. MKS BASE V1.6+ Motherboard with MKS TFT32 LCD Screen Mega2560 Ramps1.4 for 3D Printer

    MKS BASE V1.6+ Motherboard with MKS TFT32 LCD Screen Mega2560 Ramps1.4 for 3D Printer

    Features:
     
    Setting all the functions on a board solves the problem that Ramps 1.4 interface is tedious and easy to break down.
    The circuit board adopts high-quality two-layer board and specially optimizes heat dissipation; ramps are two-layer board.
    Special power chip is used to support 12V-24V power input to solve the heating problem of Ramps voltage conversion chip.
    Firmware can use open source firmware Marlin with the same configuration as ramps1 4 and can directly replace Ramps1.4o.
    4982 is used as motor drive, which has the same performance as 4988, but SOP package has better heat dissipation effect.
    Using high-quality MOSFET tube, the heat dissipation effect is better.
    It can accept 24V input and reduce the hot bed current to 1/4 under the same system power, which can effectively solve the heating problem of hot bed MOS tubes.
    It can directly connect Ramps 1.4, 2004 LCD control board and 12864 LCD control board.
    MKS-BASE is an open source motherboard for Ramps 1.4, Megatronics V2.0 and other problems. It is specially optimized to develop a product. It is especially suitable for manufacturers producing 3D printers in batches as motherboards.
    Matching lines can be referred to: 2PIN, 3PIN, 4PIN
    You can directly connect 2004 LCD or 12864 LCD (removing L-shaped adapter board). Because the open source design of 2004 LCD and 12864 LCD only regulates the PIN ports of EXP1 and EXP2, there is no specific specification for the direction of bull-horn insertion, so some 2004 LCD and 12864 LCD produced by non-Makerbase may have different directions of data line cards, which need to be interpolated in reverse to be used.

    Compatible with Marlin/Smoothieware/Repetier firmware
    Appearance size: 110mm X65mm
    Hole size: 102mm X57mm
    Color Touch Screen: 3.2 inch Touch Screen
    Microprocessor: 32-bit STM32 processor
    Update Method: SD File Update
    Supporting inch storage system: SD card, U disk
    Support file format: Gcode
    Extensible modules (shipping excluded):
    WIFI module, shutdown module,
    Material breakage check switch, intermittent interruption, external clamping slot
     
    Package included:

    1 x MKS BASE V1.6
    1 x USB Data Line 30cm
    1 x MKS TFT32 V4.0 LCD Touch Screen
    1 x Grey Line

















    Learn More

    Regular Price: IDR2,474,644.00

    Special Price IDR1,374,802.00

    You Save: IDR1,099,842.00 (44%)

    Sale
  10. TMC5160 V1.2 SPI Stepper Motor Driver Board with Heatsink for 3D Printer

    TMC5160 V1.2 SPI Stepper Motor Driver Board with Heatsink for 3D Printer

    Features:
     
    Hardware compatible with StepStick and Pololu A4988 Stepper Motor Drivers
    stepper motor driver (chopper drive / constant current drive)
    Components on the bottom PCB side for better heat emission
    Automatic standby current reduction
    microPlyer - microstep interpolator for increased smoothness of microstepping
    stealthChop - for quiet operation and smooth motion
    spreadCycle - highly dynamic motor control chopper
    Drive capability up to 3A (RMS) continuous coil current
    Step/Dir interface with up to 256 microsteps
    SPI interface for configuration
    Motor supply voltage: 10...35V
    Logic supply voltage: 3.3...5V
    RSense: 0.075 Ohm
     
    Package included:

    1 x TMC5160 V1.2
    1 x Heatsink















    Learn More

    Regular Price: IDR784,125.00

    Special Price IDR435,625.00

    You Save: IDR348,500.00 (44%)

    Sale
  11. MKS RUMBA Motherboard + 6x TMC2208 Driver Kit for 3D Printer

    MKS RUMBA Motherboard + 6x TMC2208 Driver Kit for 3D Printer

    Features:
     
    Using the same CPU as Mega, Atmega2560 as the main control chip, together with high-performance USB chip Atmega16U2, to achieve compatibility with all Ramps-related firmware.
    5 temperature sensor interface input.
    All pins are drawn out to facilitate more functional expansion.
    With LCD extension interface, it can connect SD extension version of Chinese LCD screen to realize offline printing (support 2004 and 12864).
    Extended interface of steering gear to add automatic leveling function conveniently.
    Support 6 A4988 DRV8825 TMC2208 TMC2130 TMC2100 and other driving boards.
    PWM DC output (heating tube, fan, etc.): 6 output (1 high current, 3 medium current, 2 low current) are driven by high performance low conduction resistance MOS transistors, each output is indicated by LED.
    Power supply part: power input is 12V-35V, dual power supply design, effectively avoiding mutual influence. Hot bed part supports 11A current, 12V, other parts of the circuit, 5A, 12V. In order to reduce the high temperature caused by high current on Mega Controller board, it is suggested to add 12V heat dissipation fan.
    The firmware of control panel will adopt Marlin, which is the most widely used nowadays. It has good performance in stability, ease of use and functionality.
    The circuit board is specially designed for CNC processing such as 3D printer, engraving machine and laser cutting machine.
     A personal computer can be used to control a 3D printer through a USB connection or to print directly from an SD card.
    Because of the integrated design, simple installation and debugging, and the common Arduino IDE as the development software, firmware upgrade, parameter configuration is simple and easy to use.

    UART configuration interface (9600...500k Baud).
    up to 256 native microsteps (without interpolation).
    stealthChop2 - faster motor acceleration/deceleration than stealthChop.
    Automatic stealthChop and spreadCycle switchover depending on velocity.
     
    Package included:

    1 x Motherboard
    1 x USB Cable
    6 x TMC2208 Driver
    6 x Cooling Rib
    1 x Black screwdriver
















    Learn More

    Regular Price: IDR2,590,245.00

    Special Price IDR1,439,025.00

    You Save: IDR1,151,220.00 (44%)

    Sale
  12. MKS RUMBA Motherboard + 6x TMC2130 Driver Kit for 3D Printer

    MKS RUMBA Motherboard + 6x TMC2130 Driver Kit for 3D Printer

    Features:
     
    Using the same CPU as Arduino Mega, Atmega2560 as the main control chip, together with high-performance USB chip Atmega16U2, to achieve compatibility with all Ramps-related firmware.
    5 temperature sensor interface input.
    All pins are drawn out to facilitate more functional expansion.
    With LCD extension interface, it can connect SD extension version of Chinese LCD screen to realize offline printing (support 2004 and 12864).
    Extended interface of steering gear to add automatic leveling function conveniently.
    Support 6 A4988 DRV8825 TMC2208 TMC2130 TMC2100 and other driving boards.
    PWM DC output (heating tube, fan, etc.): 6 output (1 high current, 3 medium current, 2 low current) are driven by high performance low conduction resistance MOS transistors, each output is indicated by LED.
    Power supply part: power input is 12V-35V, dual power supply design, effectively avoiding mutual influence. Hot bed part supports 11A current, 12V, other parts of the circuit, 5A, 12V. In order to reduce the high temperature caused by high current on Mega Controller board, it is suggested to add 12V heat dissipation fan.
    The firmware of control panel will adopt Marlin, which is the most widely used nowadays. It has good performance in stability, ease of use and functionality.
    The circuit board is specially designed for CNC processing such as 3D printer, engraving machine and laser cutting machine.
     A personal computer can be used to control a 3D printer through a USB connection or to print directly from an SD card.
    Because of the integrated design, simple installation and debugging, and the common Arduino IDE as the development software, firmware upgrade, parameter configuration is simple and easy to use.

    The single-phase current of the two-phase stepping motor is 1.2A (peak 2.5A) and the working current of the motor is adjustable.
    Support two control modes of Step/DIR interface and SPI interface.
    Combination of maximum efficiency and optimal motor torque operation without noise.
    High-precision sensorless motor load detection.
    Reduce energy consumption by 75%.
    High-load drivers will not be out of step.
    Interface: Step / Dir or SPI
    Configuration: CFG pin or SPI
    Segmentation: up to 1/256 microPlyer microsteps 1/256
    Logical Voltage VIO: 3-5V
    Motor Voltage VM: 5.5-46V
    Motor Phase Current: 1.2A RMS, 2.5A Peak
     
    Package included:

    1 x Motherboard
    1 x USB Cable
    6 x TMC2130 Driver
    6 x Cooling Rib
    1 x Black screwdriver


















    Learn More

    Regular Price: IDR2,748,723.00

    Special Price IDR1,527,068.00

    You Save: IDR1,221,655.00 (44%)

    Sale
  13. MKS RUMBA V1.1 Motherboard Smart Controller Board 12-35V for 3D Printer

    MKS RUMBA V1.1 Motherboard Smart Controller Board 12-35V for 3D Printer

    Features:
     
    Using the same CPU as Arduino Mega, Atmega2560 as the main control chip, together with high-performance USB chip Atmega16U2, to achieve compatibility with all Ramps-related firmware.
    5 temperature sensor interface input.
    All pins are drawn out to facilitate more functional expansion.
    With LCD extension interface, it can connect SD extension version of Chinese LCD screen to realize offline printing (support 2004 and 12864).
    Extended interface of steering gear to add automatic leveling function conveniently.
    Support 6 A4988 DRV8825 TMC2208 TMC2130 TMC2100 and other driving boards.
    PWM DC output (heating tube, fan, etc.): 6 output (1 high current, 3 medium current, 2 low current) are driven by high performance low conduction resistance MOS transistors, each output is indicated by LED.
    Power supply part: power input is 12V-35V, dual power supply design, effectively avoiding mutual influence. Hot bed part supports 11A current, 12V, other parts of the circuit, 5A, 12V. In order to reduce the high temperature caused by high current on Mega Controller board, it is suggested to add 12V heat dissipation fan.
    The firmware of control panel will adopt Marlin, which is the most widely used nowadays. It has good performance in stability, ease of use and functionality.
    The circuit board is specially designed for CNC processing such as 3D printer, engraving machine and laser cutting machine.
     A personal computer can be used to control a 3D printer through a USB connection or to print directly from an SD card.
    Because of the integrated design, simple installation and debugging, and the common Arduino IDE as the development software, firmware upgrade, parameter configuration is simple and easy to use.
     
    Package included:

    1 x Motherboard
    1 x USB Cable
















    Learn More

    Regular Price: IDR1,561,580.00

    Special Price IDR867,544.00

    You Save: IDR694,036.00 (44%)

    Sale
  14. TWO TREES CNC Shield + UNO R3 Board +4x A4988 Stepper Motor Driver +4x 4401 Stepper Motor Kit for 3D Printer

    TWO TREES CNC Shield + UNO R3 Board +4x A4988 Stepper Motor Driver +4x 4401 Stepper Motor Kit for 3D Printer

    Description:
     
    Latest Arduino CNC Shield Version 3.0
    GRBL 0.8c compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
    4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
    2 x End stops for each axis (6 in total)
    Spindle enable and direction
    Coolant enable
    Uses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825 and others)
    Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
    Stepper Motors can be connected with 4 pin molex connectors or soldered in place
    Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)
     
    Package included:

    1 x CNC Shield V3.0
    1 x UNOR3 Board
    4 x A4988 Driver
    4 x 4401 Stepper Motor
    1 x USB Cable










    Learn More

    Regular Price: IDR2,009,380.00

    Special Price IDR1,116,322.00

    You Save: IDR893,058.00 (44%)

    Sale
  15. MKS BASE V1.6 Integrated Motherboard with 12864 LCD Screen Kit for 3D Printer

    MKS BASE V1.6 Integrated Motherboard with 12864 LCD Screen Kit for 3D Printer

    Features:
     
    Arduino MEGA compatible Atmega2560 and FT232 processors are compatible with all RAMPS class firmware
    Firmware can use the same configuration as ramps1.4
    Easy DISPLAY + SD-CARD connector,RepRapDiscount SmartController compatible pin header on board
    Easy connect MKS TFT on AUX-1
    3x temperature ADC connectors for thermistors
    Up to 5 motor driver with A4982
    4x PWM capable power mosfet outputs with voltage selector for MainPower.(Bed,Extruder0,Extruder1, Fans)
    4 layers PCB, optimize heat dissipation.
    6x end stop connectors with power supply Xmin/Xmax/Ymin/Ymax/Zmin/Zmax
    Recoverable fuse for short-circuit protection.
     
    Package included:

    1 x MKS BASE Board
    1 x 
    12864 LCD Screen
     


















    Learn More

    Regular Price: IDR1,712,434.00

    Special Price IDR951,352.00

    You Save: IDR761,082.00 (44%)

    Sale
  16. MKS BASE V1.6 Integrated Motherboard with MKS TFT28 Color Touch Screen Kit for 3D Printer

    MKS BASE V1.6 Integrated Motherboard with MKS TFT28 Color Touch Screen Kit for 3D Printer

    Features:
     
    Arduino MEGA compatible Atmega2560 and FT232 processors are compatible with all RAMPS class firmware
    Firmware can use the same configuration as ramps1.4
    Easy DISPLAY + SD-CARD connector,RepRapDiscount SmartController compatible pin header on board
    Easy connect MKS TFT on AUX-1
    3x temperature ADC connectors for thermistors
    Up to 5 motor driver with A4982
    4x PWM capable power mosfet outputs with voltage selector for MainPower.(Bed,Extruder0,Extruder1, Fans)
    4 layers PCB, optimize heat dissipation.
    6x end stop connectors with power supply Xmin/Xmax/Ymin/Ymax/Zmin/Zmax
    Recoverable fuse for short-circuit protection.
     
    Package included:

    1 x MKS BASE Board
    1 x 
    MKS TFT28 Color Touch Screen
     
     




















    Learn More

    Regular Price: IDR2,474,644.00

    Special Price IDR1,374,802.00

    You Save: IDR1,099,842.00 (44%)

    Sale
  17. MKS BASE V1.6 Integrated Motherboard Compatible With Mega 2560 & RAMPS 1.4 Control Board for 3D Printer

    MKS BASE V1.6 Integrated Motherboard Compatible With Mega 2560 & RAMPS 1.4 Control Board for 3D Printer

    Features:
     
    Arduino MEGA compatible Atmega2560 and FT232 processors are compatible with all RAMPS class firmware
    Firmware can use the same configuration as ramps1.4
    Easy DISPLAY + SD-CARD connector,RepRapDiscount SmartController compatible pin header on board
    Easy connect MKS TFT on AUX-1
    3x temperature ADC connectors for thermistors
    Up to 5 motor driver with A4982
    4x PWM capable power mosfet outputs with voltage selector for MainPower.(Bed,Extruder0,Extruder1, Fans)
    4 layers PCB, optimize heat dissipation.
    6x end stop connectors with power supply Xmin/Xmax/Ymin/Ymax/Zmin/Zmax
    Recoverable fuse for short-circuit protection.
     
    Package included:

    1 x MKS BASE Board
    1 x USB Cable
     
















    Learn More

    Regular Price: IDR1,320,531.00

    Special Price IDR733,628.00

    You Save: IDR586,903.00 (44%)

    Sale
  18. EinsyRambo 1.1A Mainboard + Wire Kit + 2004 LCD Display + Power Panic + Filament Sensor + MMU2 Control Board + PINDA V2 Sensor For Prusa i3 MK3 3D Printer

    EinsyRambo 1.1A Mainboard + Wire Kit + 2004 LCD Display + Power Panic + Filament Sensor + MMU2 Control Board + PINDA V2 Sensor For Prusa i3 MK3 3D Printer

    Features:
     
    - Logic:
    For Arduino MEGA compatible Atmega2560 and Atmega32u2 processors are compatible with all RAMPS class firmware
    Crystals for both usb and mcu (timing accurate to 10ppm)
    3 Thermistor jacks + 4th Thermistor circuit on ZProbe.
     
    - Motor Drivers:
    4 Trinamic TMC2130 1/256th microstep motor drivers(2 connectors on Z for Prusa Mendel and other dual Z printer designs)
    SPI Control of stepper current instead of PWM.
    Microstep mode configured by MCU through firmware (SPI, no jumpers needed)
    PWM DC outputs (Extruders, Fans, Etc.)
    4 outputs (1 Extruder, 1 BED, 2 low power (fan,etc)
    Low resistance mosfets for cool running
    Indicator led for each channel
    FANS have 3pin fan connector.
    FANS have 5V instead of 12-24V power source.
    FAN connectors have tachometer feedback pin to the MCU to measure fan speed in capable firmware.
     
    - Power:
    2 power input rails
    Heated Bed, 15A 12-24V (15A dedicated fuse)
    Primary Power 10A 12-24V: Motors, Logic & Fans (5A dedicated fuse) + Extruder (5A dedicated fuse)
    Built in SMPS for 5V generation from the Motors, Logic & Fans rail
    Provides 5V power to FANS
     
    - Connectors:
    4-pin motor,zprobe plug - Molex 5057-9404
    3-pin fan plug - Molex 5057-9403
    2-pin thermistor, mech. endstop plug - Molex 5057-9402
     
    - 2004LCD Display:
    Brand new and high quality.
    This smart controller contains a SD-Card reader, an rotary encoder and a 20 character x 4 line LCD display. You can easy connect it to your Ramps board using the "smart adapter" included.
    After connecting this panel to your Ramps you don't need your pc any more, the smart controller supplies power for your SD card. Further more all actions like calibration, axes movements can be done by just using the rotary encoder on the smart controller
    Print your 3D designs without PC, just with a g-code design stored on the SD card.
    Firmware: You need Marlin firmware v3 or newer. If you are using older firmware, you must re-flash your board.
    Size: 15cm x 5.8cm

     
    Package included:

    1 x EinsyRambo 1.1A
    1 x 2004 LCD Display
    1 x Power Panic V 0.4
    1 x Filament Sensor With Cable
    1 x MMU2 Control Board
    1 x PINDA V2 Sensor
    1 x EinsyRambo Connectors Cable Wire Complete Kit







    Learn More

    Regular Price: IDR5,573,346.00

    Special Price IDR3,096,303.00

    You Save: IDR2,477,043.00 (44%)

    Sale
  19. TMC2209 V2.0 Stepper Motor Driver Super Silent Stepsticks Mute Driver Board 256 Microsteps For 3D Printer Parts

    TMC2209 V2.0 Stepper Motor Driver Super Silent Stepsticks Mute Driver Board 256 Microsteps For 3D Printer Parts

    Features:

    - Hardware compatible with StepStick and Pololu A4988
    - Drive capability up to 1.7A (RMS) continuous coil current - 2.8A Peak
    - Step/Dir interface with microstep interpolation (up to 256 microsteps)
    - Configuration via CFG pins or UART interface
    - Motor voltage: 5.5~28V
    - Logic voltage: 3.3~5V
    - RSense: 0.11 Ohm
    - StealthChop2 - for quiet operation and smooth motion
    - SpreadCycle - highly dynamic motor control chopper (enableable via UART, OTP, CFG Pin)
    - CoolStep - current control for energy savings
    - StallGuard4 - sensorless motor load detection


    Package included:

    1 x TMC2209 Driver
    1 x Heatsink
    1 x Screwdriver




    Learn More

    Regular Price: IDR296,946.00

    Special Price IDR164,970.00

    You Save: IDR131,976.00 (44%)

    Sale
  20. Creality 3D Upgraded Version V1.1.5 24V Super Silent Mainboard Motherboard With TMC2208 Driver For Ender-3 / Ender-3 Pro 3D Printer

    Creality 3D Upgraded Version V1.1.5 24V Super Silent Mainboard Motherboard With TMC2208 Driver For Ender-3 / Ender-3 Pro 3D Printer

    Features:

    1. With speicial power chip, support 24V power input
    2. The circuit board is optimized by circuit, effectively solve the heating problem
    3. Can work with E/Z/Y/X a-xis motor
    4. With USB interface, easy to operate
    5. Newest version with super silent TMC2208 driver

    Note: Ender-3 / Ender-3 Pro use the same mainboard but different firmware, plz select the type you need


    Package Included:

    1x Mainboard
    Learn More

    Regular Price: IDR1,478,690.00

    Special Price IDR821,494.00

    You Save: IDR657,196.00 (44%)

    Sale
  21. Mainboard Replacement Control Board Motherboard + LCD 12864 Display with Cable Kit for Creality Ender-3 3D Printer

    Mainboard Replacement Control Board Motherboard + LCD 12864 Display with Cable Kit for Creality Ender-3 3D Printer

    Features:

    Professional control motherboard with USB interface, compatible for Ender 3 3D printer.
    Optimized circuit board, effectively solve the heating problem.
    Supporting 24V power input and can work with E/Z/Y/X axis motor.
    Comes with brand-new LCD module, convenient to replace this part.
    Replacement board + LCD module(including cable) for Ender-3 size 220*220*250mm.


    Specifications:

    Compatible for: Ender 3
    Voltage Input: 24V
    Mainboard Size: 10 * 7 * 2cm / 3.9 * 2.7 * 0.8in       
    Package Size: 13 * 13 * 6cm / 5.1 * 5.1 * 2.4in
    Package Weight: 223g / 7.9oz


    Note:

    Do not touch the motherboard with wet hands and keep it dry.

    Package included:

    1 x Mainboard
    1 x LCD Display








    Learn More

    Regular Price: IDR1,608,264.00

    Special Price IDR893,480.00

    You Save: IDR714,784.00 (44%)

    Sale
  22. Cloned Duet 2 Maestro Advanced 32bit Motherboard Mainboard For 3D Printer CNC Machine

    Cloned Duet 2 Maestro Advanced 32bit Motherboard Mainboard For 3D Printer CNC Machine

    Description:

    The Duet 2 Maestro is an advanced 32 bit electronics for the control of 3D printers and other CNC machines. it is part of the second generation family of Duet 3D electronics controllers that includes the Duet 2 WiFi and Ethernet. As part of the Duet 2 family the Maestro share core similarities with the other Duet 2 boards however there are key differences.

    Features highlights include open-source RepRapFirmware, 120MHZ Arduino ARM processor, and Trinamic “Silent” motor drivers with unprecedented 256 microstep
    resolution. Connectors are not included.

    Duet 2 Maestro Features:

    - Input Voltage: 12V to 28V
    - Voltage Monitoring: Monitors Vin
    - Power-Loss Recovery: Supported
    - Processor: 120MHZ Arm Cortex M4 (ATSAM4S8C)
    - Motor Drivers: 5 X Trinamic TMC2224, providing up to 1.6 A current per motor, and 256 microstepping.
    - Endstop Support: 5 X (can be with open source filament monitoring add-ons)
    - Heated Bed Support: Up to 18 A Current
    - Temp Sensor Support: 4 X capable of thermistor or direct PT1000 support.
    - Fan Support: 3 X Voltage controlled fans, 1 X always-on. Selectable 5V/Vinput.
    - Servo Support: 1 X
    - Additional Motor Support: 2 X TMC stepsticks may be added.
    - Ethernet Support: 100mbps Wired Ethernet
    - WebInterface: Included
    - LCD/TouchScreen Support: Compatible with PaneldDUE, in future firmware update.
    - Compatible Firmware: RepRapFirmware, DC42 Forks


    Click for more info.

    Package included:


    1 x Motherboard


    Learn More

    Regular Price: IDR3,242,254.00

    Special Price IDR1,801,252.00

    You Save: IDR1,441,002.00 (44%)

    Sale
  23. Cloned Duet Ethernet V1.04 Advanced 32 Bit Electronics Board Mainboard Motherboard Providing Ethernet Connectivity For 3D Printers CNC Machines

    Cloned Duet Ethernet V1.04 Advanced 32 Bit Electronics Board Mainboard Motherboard Providing Ethernet Connectivity For 3D Printers CNC Machines

    Description:

    The DuetEthernet is an advanced 32 bit electronics board for the control of 3D printers and other CNC machines. It has the same features as the DuetWifi, other than providing ethernet connectivity rather than Wifi, a full feature description is available on our documentation, in summary:
     
    - Powerful 32 Bit Processor
    - Dedicated Wifi module
    - Super quiet TMC2660 stepper drivers, up to 256 microstepping.
    - High speed SD card and support for a second SD external card if required.
    - Dual extruders on the main board, up to 5 more extruders on the expansion board.
    - High Power rating: Each stepper driver is capable of 2.8A motor current, currently limited in software to 2.4A. The bed heater channel is specifically 
      designed for high current (18A).
    - Connect via PC, tablet or smartphone on the same network to the on board web interface.
    - Setup your printer and update the firmware through the web interface.
    - All common 3D printer geometries are supported
    - Expandable up to 7 extruders with Firmware support for mixing nozzles and remapping axes to use high power external drivers.
    - Support for the PanelDue: a full colour graphic touch screen
    - Provided with Molex compatible plugs and crimps as well as ferrules for power and heater terminals.

     
    Package included:

    1 x Duet Ethernet Board
    1 x Cable,
    50 x Jumper
    8 x 4pin Plug
    6 x 3pin Plug
    7 x 2pin Plug




    Learn More

    Regular Price: IDR3,477,267.00

    Special Price IDR1,931,815.00

    You Save: IDR1,545,452.00 (44%)

    Sale
  24. MKS GEN V1.4 Mainboard Motherboard+ 12864 LCD Display Screen + 5x A4988 Driver + 6x Limit Switch Kit For 3D Printer

    MKS GEN V1.4 Mainboard Motherboard+ 12864 LCD Display Screen + 5x A4988 Driver + 6x Limit Switch Kit For 3D Printer

    MKS GEN V1.4 Motherboard:

    1. The 2560 and ramps 1.4 are assembled on a single board, which solves the problem that the Ramps 1.4 combination interface is cumbersome and prone to failure.
    2, can replace the motor drive, support 4988 drive and 8825 drive, TMC2100 drive
    3, the circuit board uses a high-quality 4-layer board, and specifically optimized thermal processing; Ramps is a 2-layer board.
    4, using high-quality MOSFET tube, better heat dissipation.
    5, using a dedicated power chip, support 12V-24V power input, to solve the problem of Ramps voltage conversion chip fever.
    6, can accept 24V input, the same system power can reduce the thermal bed current to 1/4, effectively solve the hot bed MOS tube heating problem.
    7, firmware can use open source firmware Marlin, configuration and ramps1.4 exactly the same, can directly replace Ramps1.4.
    8, can directly connect Ramps1.4, 2004LCD control board and 12864LCD control board.
    9, reserve motor pulse and direction output port, convenient external current to connect large current (such as 2A, 5A) motor drive circuit.
    10. Reserve the Servos, AUX-1, and AUX-2 interfaces on Ramps 1.4, and provide three 5V outputs and three 12V output interfaces.


    Note:

    The A4988 drivers will be sent in random color (green or red)


    Package included:

    1 x MKS GEN V1.4 Motherboard
    1 x USB Cable
    1 x 12864 Display
    6 x limit switch
    6 x Switch Connect Cable
    5 x A4988 Drive (Red/Green)
    5 x Heatsink


    Learn More

    Regular Price: IDR1,571,742.00

    Special Price IDR873,190.00

    You Save: IDR698,552.00 (44%)

    Sale
  25. MKS-GEN V1.4 3D Printer Mainboard+5Pcs DRV8825 Driver for 3D Printer Compatible with Mega 2560 R3/RepRap Ramps1.4

    MKS-GEN V1.4 3D Printer Mainboard+5Pcs DRV8825 Driver for 3D Printer Compatible with Mega 2560 R3/RepRap Ramps1.4

    About MKS GEN V1.4:

    Features:


    1. It gather 2560 and ramps1.4 on a same board, which solved the Ramps1.4 combination interface problem that easily out of order.
    2. Can replace the motor driver, support 4988 drivers and 8825 drivers
    3. Circuit board uses the high quality of 4 layer board,optimize heat dissipation;Ramp Is 2 layer board
    4. Using special power supply chip, support the 12v-24v power input, solve the problem of Ramps voltage conversion of chip fever.
    5. Accept 24V input, under the same system power can reduce the current hot bed to 1/4, effectively solve the problem of hot bed MOS tube heating
    6. The firmware can use open source firmware Marlin, configuration are exactly the same with ramps1.4 , can be directly replace ramps1.4 also
    Can be connected directly to Ramps1.4, 2004 LCD control board and the LCD board (12864)
    7. Provide three 5V output, three 12V-24V output interface.
    HTB1rfg_xTdYBeNkSmLyq6xfnVXar

    About Drv8825: 
     
    ● Heat Sink: 9*9*5mm/approx 0.35*0.35*0.2inch
    ● DRV8825: 20*15*11mm/approx 0.79*0.59*0.43inch
    ● Six different stepping resolutions: full, half, 1 / 4,1 / 8,1 / 16,1 / 32
    ● Suitable for driving below 8.2V ~ 45V 2.5A stepper motor
    ● A simple steps and direction control interface
    ● Adjustable potentiometer can adjust the maximum output current, resulting in higher step rate
    ● Automatic current decay mode detection / selection
    ● Thermal shutdown circuit, undervoltage lockout, crossover current protection
    ● Ground short-circuit protection and load short-circuit protection
    DRV8825
    Package Included:

    1 x MKS  GEN V1.4
    5 x DRV8825
    5 x Heatsink
    1 x USBCable



    Learn More

    Regular Price: IDR1,324,025.00

    Special Price IDR735,569.00

    You Save: IDR588,456.00 (44%)

    Sale

Items 1 to 25 of 38 total

Page:
  1. 1
  2. 2

Grid  List